FamilyGardenTrains
https://familygardentrains.com/forums/

Windows and Doors
https://familygardentrains.com/forums/viewtopic.php?f=27&t=65
Page 1 of 1

Author:  Perryo [ Sun Mar 01, 2015 1:37 pm ]
Post subject:  Windows and Doors

I am in the process of building a number of structures for my new garden railway. Many of my buildings will be made mostly from wood (based on another of my hobbies) but that still leaves lots of doors and windows for me to buy or make.
There are some very nice pre-made doors and windows available, however a look at their prices left me considering other alternatives. This led me to Colorado Model Structures (CMS). In addition to complete plastic building kits, CMS has various building components available for the scratch builder. Their CMS 31011 Window and Door Set comes with 2 doors and 9 windows (in four different sizes) at a reasonable price.
I have found that with a bit of cutting with a hobby knife and snap saw, and/or the addition of some styrene strips, I can take the basic doors and windows provided in the CMS set and achieve different looks to add variety to my homemade structures. Here is what I have done so far with the basic door and windows from the CMS 31011 set:

Attachments:
image.jpg
image.jpg [ 96.07 KiB | Viewed 9173 times ]
image.jpg
image.jpg [ 103.14 KiB | Viewed 9173 times ]

Author:  paulrace [ Sun Mar 01, 2015 4:40 pm ]
Post subject:  Re: Windows and Doors

Very nice. One advantage of the extra trim is that it helps cover up any unevenness in the hole you cut for the door or window. The CMS windows are made to come through the back of perfectly pre-cut holes. This way, if you get off a little, it gets covered anyway. - Paul

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://phpbb.com/