Family Garden Trains
Discussion Forums

Visit our Affiliated Pages:
Return to Family Garden Trains Home page
Garden Railroading Primer Articles: All about getting a Garden Railroad up and running well
Big Christmas Trains: Directory of Large Scale and O Scale trains with holiday themes
Return to Big Indoor Trains Home page
Building temporary and permanent railroads with big model trains
Best-loved railroad songs and the stories behind them.

It is currently Thu Dec 12, 2024 5:25 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Building A Bridge
PostPosted: Fri Apr 15, 2016 10:07 am 
Offline
User avatar

Joined: Thu Jul 31, 2014 7:26 am
Posts: 17
We needed a bridge to cross the Cooper River into Camden City on our Camden & Mount Holly Railroad (C&MH RR). The "river" is really just a dry stone bed to handle water runoff during heavy rains but crossing it required two, 5ft long, spans for single tracks at two different heights; The C&MH RR mainline track elevation is about 11 inches higher than the lower level trolley line.

The upper span was to be a simple through-girder type bridge. However, I wanted the lower span to have the appearance of a drawbridge which in my imagination would open to allow barge traffic to travel up-river to a small dock facility (a future project ;) ).

An internet search revealed many photos of really neat railroad drawbridges. Most were way beyond both what I needed and my modeling skills. However, the Amtrak bridge over the Bush River at Perryman, MD seemed simple enough to give me a few ideas for a plausible looking small drawbridge. The Library of Congress online photo collection has several pictures of this bridge which was built back in 1913 and is still in use. This photo provided what I needed - http://lcweb2.loc.gov/service/pnp/habsh ... 6313pv.jpg

This is how the bi-level Cooper River bridge turned out. Building it on the workbench was a fun wintertime project.


Attachments:
C&MH BRIDGE 1.jpg
C&MH BRIDGE 1.jpg [ 219.14 KiB | Viewed 16224 times ]
C&MH BRIDGE 4.jpg
C&MH BRIDGE 4.jpg [ 202.78 KiB | Viewed 16224 times ]
Top
 Profile  
 
PostPosted: Tue Apr 19, 2016 1:42 pm 
Offline
User avatar

Joined: Thu Jul 31, 2014 7:26 am
Posts: 17
I thought that I would post some info on how I went about building my Cooper River bridge for anyone on the forum who might be interested.

At first I intended to build the bridge supports from stacked concrete paver bricks. That would have been prototypical, workable, and inexpensive, but I happened to find two G scale steel support structures online that I could use as-is to give the bridge a little bit of a different look. It remained for me to build the two, 5ft long, bridge spans themselves.

For rigidity each span uses two, 5ft x 1-1/2" x 1-1/2", stamped steel angles held together in several locations with steel tie plates pop-riveted into place across the bottoms of the angles. These items were obtained from my local home improvement store. All nuts, bolts, screws and pop-rivets used are stainless steel.

The side girders for the upper span were made from a 5ft piece of 2-1/2" square PVC rain gutter downspout. The plastic downspout was split twice along its length. The two resulting "C" shaped pieces were turned inside out, ]_____[ and pop-riveted to the outsides of the steel angles. Scraps of the PVC material were cut and glued in place to make vertical stiffeners on the outsides of the girders. The span was painted flat black and labeled with the railroad's name using self-stick vinyl letters. Pieces of 5ft x 1-1/2" x 1/4" pressure treated wood lattice, stained brown, were screwed down to the angles to make the two maintenance walkways. The final result was a simple, relatively inexpensive, 5ft long bridge span.

For the lower span I chose to start with the pre-made girder bridge side pieces now available from Colorado Model Structures. These molded plastic side pieces can be used as-is in many situations but I decided to do some cutting and gluing to make them the basis for the drawbridge span. Pieces of styrene plastic from my local hobby shop were used to finish-off the cut edges of the girder structures and to make the faux "lifting gear" mechanism. These pieces were then bolted to the sides of the steel angles and painted flat black. Pieces of stained pressure treated wood lattice were again used make the two maintenance walkways. A chunk of pressure treated wood, painted gray, was hung from the bottom of the span to simulate the drawbridge's concrete counterweight. A bridge tender's shanty was made from an old caboose body shell and styrene. The shanty was added to the end of the drawbridge span to finish the project.

BTW: The caboose body shell was donated by a member of our local garden railroad club; just one of many good reasons to get involved with a local club if you can.

Any questions or comments are welcome.
If you have a favorite bridge on your railroad please share it!

Attachment:
Upper_Span_Combo_1.jpg
Upper_Span_Combo_1.jpg [ 233.05 KiB | Viewed 16200 times ]

Attachment:
DRAW%20COMBO%203S.jpg
DRAW%20COMBO%203S.jpg [ 143.74 KiB | Viewed 16200 times ]


Top
 Profile  
 
 Post subject: Re: Building A Bridge
PostPosted: Tue Apr 26, 2016 8:41 pm 
Offline
Site Admin
User avatar

Joined: Wed Mar 12, 2014 9:13 am
Posts: 184
PerryO, this looks great. I'll forward the link to CMS.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron


Click to see sturdy Lionel(r) trains that are perfect for your Christmas tree.


Visit our affiliated sites:
- Trains and Hobbies -
Return to Big Indoor Trains Home page
Return to Family Garden Trains Home page
Big Indoor Trains Primer Articles: All about setting up and displaying indoor display trains and towns. Garden Railroading Primer Articles: All about getting a Garden Railroad up and running well
On30 and O Gauge trains to go with indoor display villages and railroads
Big Christmas Trains: Directory of Large Scale and O Scale trains with holiday themes
Visit Lionel Trains. Free building projects for your vintage railroad or Christmas village. Click to see Thomas Kinkaded-inspired Holiday Trains and Villages. Big Christmas Train Primer: Choosing and using model trains with holiday themes Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Click to see HO scale trains with your favorite team's colors.
- Family Activities and Crafts -
Click to see reviews of our favorite family-friendly Christmas movies. Free, Family-Friendly Christmas Stories Decorate your tree the old-fashioned way with these kid-friendly projects. Free plans and instructions for starting a hobby building vintage-style cardboard Christmas houses. Click to find free, family-friendly Christmas poems and - in some cases - their stories. Traditional Home-Made Ornaments
- Christmas Memories and Collectibles -
Visit the FamilyChristmasOnline site. Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Visit Papa Ted Althof's extensive history and collection of putz houses, the largest and most complete such resource on the Internet.. Click to return to the Old Christmas Tree Lights Table of Contents Page Craft and collectibles blog with local news of Croton NY.
Click to visit Fred's Noel-Kat store.
- Music -
Carols of many countries, including music, lyrics, and the story behind the songs Wax recordings from the early 1900s, mostly collected by George Nelson.  Download them all for a 'period' album.
Best-loved railroad songs and the stories behind them.
Heartland-inspired music, history, and acoustic instrument tips. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable.



Click to trains that commemorate your team!

Powered by phpBB® Forum Software © phpBB Group