Preparing for 2021's Christmas Train Day

Our railroad is outside, which can make running trains during the holidays "interesting." (Last year, we had four measurable snows in November.)

But we still like decorating our garden railroad for Christmas and having at least one Christmas-themed open railroad. In fact, we've been doing it since 2007, only missing in the year we moved.

What is "Christmas Train Day"?

This Year's "Prep"

In early October, I had a small Halloween-themed open railroad, for which I created a "Ghost train" from scraps of old Bachmann passenger trains.

Before that event, I set out several of my buildings that I haven't had outside since we moved, due to time constraints. I also set out the castles I trashbashed for our Christmas Train Day two years ago. They're looking a little "long in the tooth" at this point, but they're good for one more year without a repaint.

Let There be Light

Several of the buildings I moved outside had 12v lighting sockets installed already, so it was mostly a question of getting wires run between them and the power supply. (For a description of how I installed those click here and scroll down to the header "Moving to Individual Building Lighting.")

I also had a few sockets leftover from earlier lighting projects. So for the houses that didn't have lighting, or bottoms, I soldered long leads to the 12v sockets and ran wires back to 12v power supplies.

After testing the circuits, I laid the bulbs right on the concrete stepping stones I use for foundations and set the buildings on top. From a normal viewing position, they look fine.

Also, when I take my model buildings in for the winter, I'll leave the sockets and bulbs right where they are so they can light the bird feeders I use in their stead.

In the photo to the right, the city buildings are prewired. The buildings on the upper level are lit by the "lightbulb on the concrete under the house" method.

I was running low on time and materials when I started this effort, and I ordered some more, but they didn't come in time to incorporate before the big weekend. Plus one set of buildings that I had pre-wired had a short that burnt out a power supply before I realized it. Ooops

But at least the ones that have got lit look good, you have to admit. Maybe next spring. . . .

The castle I set out for Halloween will still be there until Christmas; the loop of track that surrounds it will host a Lionel battery-powered Hogwarts train.

The lighting on the castle is temporary - I wove a strand of orange lights around to make the openings glow. The reflection of the orange lights on the rocks behind the castle is pretty cool, too.

Rope Lighting - a Cincinnati-area garden railroader who used to hold extensive Christmas-themed open railroads used to lay rope lighting along his right-of-way to make the Christmas trains easier to see after dark.

It's not exactly "prototype," but I have found rope lighting useful for various purposes, including casting at least a dim light on parts of the railroad that would otherwise be in complete darkness after the sun goes down.

A few years ago, I ran a white/clear rope light around the inside of the right-of-way on the top platform. Because of its location, only a few really tall people could see it during the day. Plus, the vinyl on these always turns brown after a while, so even those folks wouldn't notice it unless they were looking for it. It's still there, on a timer, giving the structures and accessories on that platform a dim glow after dark.

Last week, as part of my preparations for the Christmas Train Day, I ran a long rope light around the edge of the large, newer lower platform. In part, I wanted to shed some light on the buildings and accessories that didn't have light (yet), so they wouldn't just be big dark hulks once darkness fell.

You'll recall that I have 2 3/4" strips of pressure-treated fencing material around the edges of my platforms, in part to keep my dirt and gravel in place. I brushed back the gravel from the edge and installed the rope light, using the chintzy brackets the manufacturers provide.

One one corner, where they were fairly close to the buildings, they worked pretty well to help see them after dark. The following photos show two sides of the "city block" that is lit this way.

On the long stretch where most of the buildings were installed, however, the light they cast was blocked by the right-of-ways between the rope lights and the buildings. Fortunately, that was the stretch where most of the buildings were lit, so at least there wasn't total darkness there.

In the meantime, it did help people keep from walking into the edge of the platform after dark, so that's a function, too.

On the other end of that platform, I ran the rope light strand behind the 2"x6" "bridge," on that level, lighting that level of the waterfall at night, as you'll see in photos further down the page.

In the spring, when I move my buildings back into their non-holiday places, I will work on alternative lighting, such as streetlamps, home-made or repurposed.

Christmas Trains

And, because running in cold weather is so hard on the locomotives, I have a few extras to keep in "reserve" for when, say, one of the early Bachmann 10-wheelers decides that the best time to spit a gear is when you have a crowd of people over.

This year, I tried to resurrect one of Bachmann's rarest early Christmas trains - the "Polar Express" they made after the book came out but before the movie came out. Because Warner Brothers changed the trains' paint scheme for the movie, the Bachmann set looks "funny" to people today. But I like it.

But while researching that set and others, I thought it might be nice to list out all the Christmas-themed Large Scale trains Bachmann made over the years. Not a "catalogue," since these trains have value only for operators, not collectors. Also, many of the early locomotives (like the one that originally pulled the "Polar Express") have either died or are one operating session away from their last gasp.

The result was an article just on Bachmann's Christmas trains. All but a few are discontinued, but most of them had similar road names and color pallets, so putting your own Christmas trains together by mixing and matching pieces you can find is not out of the question.

That said, in addition to the "Polar Express" set I have got running, I have in reserve:

• An Aristo "Christmas package" Eggliner that looks like a wrapped Christmas present
• A Bachmann Christmas-themed closed streetcar
• A Lionel Santa-and-snowman handcar
• A Lionel 0-6-0T from a Christmas set
• A handful of "Thomas the Tank" trains, including Thomas, James, and Percy
• Miscellaneous other coaches and freight cars.

In addition, my old Lionel Battery-powered G-gauge Hogwarts Express will be running on the loop around the castle. And two or three of Lionel's 2"-gauge "Ready-to-Play" trains will be set up on the back deck for children to operate. They won't run on my 45mm track, but they actually run better than the G-gauge ones because the batteries are in the locomotive, giving it more traction. And the remotes link to the individual trains, so you can run two or three at a time without interference.

Christmas Decorations

For the main event, we also moved Christmas lights and decorations to that end of the yard. That included putting colored LED lights on the row of 2'-3' arborvitaes that are up against the fence. Sorry, no photos of that yet.

Conclusion

In the meantime, much of the building lighting will continue to function through the coming season, even after we've removed the Christmas decorations and accessories. So - progress.

Keep in Touch

If you're headed toward or past Springfield, Ohio, please let me know, and I'll see if we can work out a quick visit.

Finally, please let us know about your ongoing projects. Ask questions, send corrections, suggest article ideas, send photos, whatever you think will help you or your fellow railroaders. In the meantime, enjoy your trains, and especially enjoy any time you have with your family in the coming weeks,

Paul Race

FamilyGardenTrains.com

Return to Family Garden Trains' Home Page - The home page with links to all the other stuff, including design guidelines, construction techniques, structure tips, free graphics, and more.

Proceed to "Easy Lighting for North States Bird Feeders" - After I put my model buildings away for the winter, I brought out the North States bird feeders I use to keep my railroad from looking naked all winter long. Since I had wired several sections of my railroad for lighting, I went ahead and put lighting in my bird feeders as well.

Click on the photo to see our status as of December, 2021.

Return to "Making a Large Scale Ghost Train" - In preparation for an October open railway, I repainted and relabeled decrepit Bachmann Big Hauler pieces to create a one-of-a-kind Halloween train. Materials included purple spray paint and vinyl lettering I created on my Cricut. I added "ghost" passengers made from cheap Asian seated figures painted with glow-in-the-dark paint.

Click on the photo to see our status as of mid-October, 2021.

Return to "Portal Installation on the New Boston and Donnels Creek." . We shimmed out the frames for the tunnel entrances to make them more vertical, installed I.S.L.E. portals we had painted previously, and stacked stones around them to camouflage the wooden parts. There's a bit more work to do, but its a big improvement over black holes at each end of the tunnel

Click on the picture to see our status as of early October, 2021.

Return to "Dirtscaping on the New Boston and Donnels Creek, Part 3" - Raising 'mini-mountains' near the new tunnels to make them seem more blended into the dirtscape. Lots of rocks moved, and more trees trimmed and planted. Also, we moved our towns into position in preparation for a club meeting at our home.

Click on the photo to see our status as of mid-August, 2021.

Return to "Tunnel Framing on the New Boston and Donnels Creek, Part 2" - Adding rocks, dirt, and plants to the new tunnel structures. Because I wanted to transplant dwarf and miniature trees to the new "mountains," I had to move a substantial amount of rocks and dirt. But I feel the result will be well worth it, once the groundcovers fill in.

Click on the photo to see our status as of late July, 2021.

Return to "Tunnel Framing on the New Boston and Donnels Creek, Part 1." We planned and built two wooden boxes that would become the framework for two short tunnels on our raised platform railroad. That effort was made a little more complicated by the fact it was a "retrofit." I hadn't planned for them at first, so getting them in place took some finangling.

Click on the picture to see our status as of mid-July, 2021.

Return to "New Right-of-Ways on the New Boston and Donnels Creek RR" - Adding a loop based on 10'-diameter curves. Includes cutting and installing 2x6 roadbed, bridging the waterfall, and cutting a third passage through the train shed, as well as installing roadbed for two smaller loops.

Click on the picture to see our status as of late March, 2021.

Return to "Creating a Railroad Timetable" - No train station would be complete without a timetable showing arrivals and departures (as well as expected arrivals and departures). We made one with a big piece of underlayment, framed it with scrap lumber, cut lettering for it with a craftcutter, and lined it with striping tape. This one is hinged to a shallow shelving unit that is holding the dvds we sometimes watch while working on projects in our workshop.

Click on the picture to see our status as of January, 2021.

Return to "Christmas Preparations and Operations 2020" - A series of families were going to visit during the holiday season (masked and distanced, of course), so we just had to do a little Christmas decorating, and get as many trains running as possible for the kids. This included laying temporary ROWs on the new platform and setting up two Lionel RTP trains for kids to run.

Return to "Garage to Train Station, Part 2" - continuing to fix up one end of my garage to resemble a Victorian train station interior. I used a digital projector to outline vintage coach details for my windowframes. Then I painted the backgrounds, attached the windowframes, and installed them on the wall. A repro Regulator clock and other details are added.

Click on the picture to see our status as of late December, 2020.

Return to "Garage to Train Station, Part 1" - fixing up one end of my garage to resemble a Victorian train station interior. The initial steps included demolition, patching the ceiling and walls, moving electrical outlets, adding wainscotting and baseboard, and planning for windowframes with painted backgrounds.

Click on the picture to see our status as of early December, 2020.

Return to "Westward Expansion, 2020, Part 3" - Thanks to a spate of unusually warm weather in early November, I was able to get the new platform finished, lined with vinyl, and bordered with trim boards to keep the dirt and gravel in place.

The next "permanent" improvements will wait for now. In the meantime, we will set out buildings and a temporary loop or to entertain visitors between now and Christmas.

Click on the picture to see our status as of mid-November, 2020.

Return to "Westward Expansion, 2020, Part 2" - We had to be careful leveling the last joists so the frame, decking, and right-of-way would be as level as possible. Fortunately we were able to get enough lumber to get a good start on the frame.

We also added one last tweak to the frame design to make it easier to extend this platform to its originally planned size, if and when we get a chance to do so.

Return to "Westward Expansion, 2020, Part 1" - With a lumber shortage and warm weather running out, we revised our plans for the next addition, bought what decent lumber we could find, dug holes, installed posts, and attached joists.

We were hoping to get the lumber we need to finish the platform before cold weather set in. Click on the link to see our status as of late September, 2020.

Return to "Train Storage Solutions, 2020" - Using periods of cold weather to get things sorted in the garage, including shelf building and tips for schlepping trains from storage to the tracks.

Click on the following link to see our status as of late January, 2020. https://familygardentrains.com/newbost/20_1_19_shelves/shelves.htm

Return to "Expansion Planning, 2020" - Three years after starting a garden railroad in our new home, we are trying to figure out the best way to finish the last loop of our raised platform railroad. How to make room for 10'-diameter curves and more towns and industries, but still keeping things manageable requires some thinking and rethinking.

Click on the photo to see the options we were reviewing for the next and last expansion.

Return to "Winter Preparation, 2019" - After the big open railroad event, we try to prepare the railroad for the cold months, including populating the railroad with North States bird feeders so it doesn't look empty, adding an air pump and bubblers to the pond, and more.

Click on the following link to see our status as of early December, 2019. https://familygardentrains.com/newbost/19_11_24_winter_prep/19_11_24_winter_prep.htm

Return to "Christmas Train Day, 2019" - Three years after starting a garden railroad in our new home, we host another Christmas-themed open railroad, giving many families a jump start on Christmas celebrations and sharing the experience of running trains with lots of kids.

Click on the photo to see a brief record of our busiest weekend in November, 2019.

Return to "Preparing for Christmas Train Day 2019" - Wrapping up construction projects for 2019 and getting ready for our annual Christmas-themed open railroad. Includes new lighting and other features, providing a temporary home for a Hogwarts Express train, weather issues, and more. Click to go to article.

Click on the following link to see our progress of mid-November, 2019.

https://familygardentrains.com/newbost/19_11_01_prep_for_train_day/19_11_01_prep_for_train_day.htm

Return to Decking the NEW New Boston and Donnels Creek Part 2 - Getting the next part of the railroad ready to install trains. Includes installing 2"x6" decking, vinyl sheeting, edges to hold back the gravel, and corrugated steel panels. It's not done, but it will give us another place to set up trains for our next Christmas-themed open railroad.

Click on the photo to see our status as of late October, 2019.

Return to "Framing the NEW New Boston and Donnels Creek RR - Part 7" - Installing posts, joists, framing, and decking for the eastern expansion of the NEW New Boston and Donnels Creek. Although this installation was complicated by having to fit into an existing framework, the methods used could work for any raised-platform railroad.

Click on the following link to see our progress of early October, 2019.

https://familygardentrains.com/newbost/19_27_framing/19_27_framing_part_7.htm

Return to "Planning the NEW New Boston and Donnels Creek RR - Part 5" - Once the major components of the water feature were installed and tested, we decided to add one more bit of railroad proper before our "Christmas Train Day," this November. The addition, about 5'x11', will allow us to put a small train and some scenery closer to eye level for youngsters. Eventually it will be part of the larger plan that will allow us to run our bigger cars and locomotives.

Click on the photo to see our plans for the next addition, as of late September, 2019.

Return to Waterscaping Part 4. - Installing the last connecting pool, so the whole planned waterfall is complete except for dirtscaping and planting.

The process included checking the pump, extending the hoses, rescuing toads, building the platform, trimming the platform, testing the pool's location, etc.

Click the photo to go to the article.

Return to "Waterscaping, Part 3" - After seven months of crazy long work hours, I finally got some free time to continue working on the railroad. Weather permitting, I often worked all the live-long day. This article describes installing two posts that will eventually support the last connecting pool, then digging the big hole for the in-ground pond, complicated by a three-month drought that turned the ground to concrete.

Click on the photo to see our progress as of mid-September, 2019.

Return to Christmas Train Day, 2018 - After two years without our traditional Christmas Train Day (something we did from 2008 through 2015), we were anxious to get started again, even without a huge right of way to show off. The kids' trains, the extra Thomas railroad, the popcorn popper and two Bachmann Christmas trains got a big workout. And the visiting kids all loved it!

Click on the photo to see a lot of last-minute preparations and some photos of the November 10, 2018 event itself.

Return to "Adding a Train Shed Part 6" - Installing the board and batten siding on our train shed, installing the windows, installing the trim, testing the "tunnel entrances," and more.

By the way, going over lumber receipts in early 2019, I couldn't believe I was still siding the train shed in late October, and managed to have an open railroad in mid-November. It is a little crazy how fast things can go together if you have a deadline and a lot of gift cards.

Click on the photo to see our progress as of late October, 2018.

Return to "Adding a Train Shed Part 5" - Planning the doors, walls, and windows of our garden train shed.

Includes choosing the siding and windows, installing the door, painting the windowframes, and adding crosspieces to support the vertical siding boards.

Return to "Adding a Train Shed Part 4" - Choosing and installing underlayment and drip edge to protect the sheathing until I can get the final roof installed.

Now the roof is waterproof enough to get us through the next couple of months at least, maybe more.

Return to "Adding a Train Shed Part 3" - Adding fascia, sheathing, and end trim to the in-progress train shed.

I thought about bringing in helpers for this part, but a reader commented on how helpful it was to see how one person could do this sort of thing by himself, so I just kept plugging away.

Click on the photo to see our progress as of September 13, 2018

Return to "Waterscaping Part 2" - Getting this year's waterscaping project done (for now at least). Installing and dirtscaping the third level of the waterfall. Installing pump and filter, adding an extra container and modifying the ones we already had installed to keep the water running smoothly. And lots of other tweaking. Includes tips about introducing fish and plants, as well as other information about water features in general that you may find helpful.

Click on the photo to see our status as of August 5, 2018.

Return to "Adding a Train Shed Part 2" - Adding rafters to the frame of the in-progress train shed. Now it's starting to look like it might actually be a structure and not just a crazy collection of posts.

The way we got the rafters and ridge board up wouldn't work for everybody, but it worked for us, and hopefully will help other folks to "think outside the box" - literally in this case.

Click on the photo to see our progress as of July 14, 2018.

Return to "Adding a Train Shed Part 1" - What started out as a simple addition of a deck to stand on when putting trains on the track got a little more ambitious when I realized that JUST installing the deck this year would require more work next year. So we framed out what we planned to be a train shed attached to the railroad. If it ever gets finished, I can easily put trains on the track at a moment's notice instead of schlepping them out from the garage.

Click on the photo to see our status as of July 9, 2018.

Return to "Waterscaping the NEW New Boston and Donnels Creek Part 1," our article on getting the top two layers of the waterfall on solid footing and getting the third layer framed. After we finish decking and dirtscaping the third layer, we will probably add a washbasin or something for the water to flow into, then add a pump to get the waterfall flowing. No big pond until next year at least - too many other projects.

Click on the photo to see our progress as of June 13, 2018.

Return to "Dirtscaping the NEW New Boston and Donnels Creek RR, Part 2. - Adding barriers to keep the rocks, dirt, and plants where they're supposed to go, placing platforms and running wiring for buildings, adding rocks, dirt, and plants to the upper level of the railroad.

Click on the photo to see our status as of June 1, 2018.

Return to "Adding Raised Roadbed to the NEW New Boston and Donnels Creek, Part 2" - Trimming the corners off the roadbed on the upper layer and cutting the pieces that will support the curves on the middle layer. We need to get the upper two tiers of the pond installed before we totally complete this step, so the article doesn't quite show the finished product. You'll see it later as part of other articles.

Return to "Adding Raised Roadbed to the NEW New Boston and Donnels Creek RR, Part 1" - Sorting out our priorities for the spring and summer of 2018. There a lot of little chores we really should get done before we start on the next big addition. Click to see our plans as of February 27, 2018.

Click on the photo to see our status as of February 20, 2018

Return to "2018: Springing into Spring on the NEW New Boston & Donnels Creek RR." - Sorting out our priorities for the spring and summer of 2018. There a lot of little chores we really should get done before we start on the next big addition. Click to see our plans as of February 27, 2018.

Click on the photo to see our status as of February 20, 2018

Return to "Dirtscaping the NEW New Boston and Donnels Creek RR, Part 1. - Putting edging around the existing "layers" of the new railroad, and beginning to add gravel and rocks. There were a few test runs, but we got stopped early by bad weather before we could dump the rest of the rocks, gravel, and dirt, much less plant the plants we hoped to get in before snowfall.

Click on the photo to see our status as of November 21, 2017

Return to "Decking the NEW New Boston and Donnels Creek RR - Decking the 'middle layer' of our proposed three-tier outdoor railroad. Prepping more track, laying out track and decking to make certain we have measurements correct, installing most of the remaining decking for this layer.

Click on the photo to see our status as of October 25, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 6" - Modifying and finishing the framing on the second layer, cantilevering, using R3 track versus all other pre-curved track formats, finalizing the track plan, why painting the track makes old and new track blend better, and more. This will be the last bit of "framing" in 2017, and it worked out well, considering.

Click on the photo to see our status as of October 15, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 5" - Spreading the billboard-sourced vinyl underlayment on the top layer. Prepping used Aristo track for (hopefully) many more years of service. Laying the first loop of track, attaching power wires with spade terminals, and testing conductivity with a Bachmann streetcar.

Click on the photo to see our status as of October, 10, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 4" - Planning and running the decking for the top layer, testing the track plan, checking clearances, prepping used track with new railjoiners, examining the vinyl I ordered to go over the decking, and more.

Click on the photo to see our status as of September 26, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 3" - Getting the frame finished on the top layer, ordering other things I'd need eventually, deciding on materials for the decking on the top layer (at least).

Click on the photo to see our status as of September 17, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 2" - Once I had the overall frame relatively solid, I hooked up the underground power lines to two GFI plugs that should be in easy reach once everything is finished. I also decided to frame out the top railroad layer while I could still access the center of the railroad easily. Because I was running out of vertical space, I reconfigured that layer. Then after I got the "core" pieces on, I changed my plan again. But the whole thing is getting easier and easier to visualize, and is getting closer to complete with every board I cut and fasten on.

Click on the photo to see our status as of September 7, 2017

Return to "Framing the NEW New Boston and Donnels Creek RR, Part 1" - Once I started dropping posts in the holes and screwing things together, I didn't want to stop before I had the basic frame built (for one thing, the wood warps less once it's fastened in place). Now the folks driving down the street past our house (we're on a corner lot) probably wonder if I'm building an elaborate chicken coop, but that's fine with me. I still need to make a few more lumber runs and do a lot more cutting and sawing, but having the basic frame in place should make the next bits a lot easier.

Click on the photo to see our status as of August 10, 2017

Return to "Breaking Ground on the NEW New Boston and Donnels Creek" - Okay, in case you wondered if we'd ever get started on the thing, we broke ground in July, using a manual post-hole digger. Well two manual post-hole diggers. But by the end of this article, we're ready for the posts to start going in.

Click on the photo to see our status as of the end of July, 2017

Return to "Planning the NEW New Boston and Donnels Creek, Part 4" - Well, the rented post-hole digger fell through, so we dug our vegetable garden with a manual post-hole digger (the scissors kind). In addition, I stake out where the railroad was going to be. Twice. And tweaked the plans again. Sorry about the redo's, but sometimes just walking around the yard trying to visualize things makes me reconsider something that seemed "settled" only a few days before.

Click on the photo to see what we were considering as of late May, 2017

Return to "Planning the NEW New Boston and Donnels Creek, Part 3" - We have still not broken ground. In part because we plan to rent a post-hole digger and dig the post holes for our raised vegetable garden and the first phase of the garden railroad at the same time, and we don't have enough lumber on hand yet. (If we didn't break it down into multiple trips, we'd be blowing out the shocks on our minivan.) In the meantime, we used a line level to see if the slope of the back yard was as bad as we thought it was (it's worse), and we did other site preparation, including planting a whole bunch of spruce tree seedlings to eventually give us some privacy in our side and back yard. Plus, I'm still wavering a little on the "where-to-start-first" issue.

Click on the photo to see what we were considering as of late April, 2017

Return to "Planning the NEW New Boston and Donnels Creek, Part 2" - More plans. We've moved on from the 2"x6" roadbed-on-posts to a sort of "train-table-outside" plan. Our goals include low-maintenance, high interest, and high reliability. We're also trying to get around having a thousand dollars' worth of dirt hauled into the back yard. If you want to get some idea of what our planning process looks like, reading these through in sequence may help. Or it may drive you crazy.

Click on the photo to see what we were considering in early April, 2017

Return to "Planning the NEW New Boston and Donnels Creek, Part 1" - If you're subscribed to our newsletter, you know that we moved just after Thanksgiving in 2016, leaving behind most of the track, a few of the bird feeders, and one Bachmann train set for the new owners. We also left behind a high-maintenance garden that we do not intend to replicate at the new place. This is the first chapter of a new chapter in our lives, which we hope will include a lot of "lessons learned." But first, some serious landscaping had to take place.

Click on the photo to see what we were considering in March, 2017

Return to the New Boston and Donnels Creek RR Page - This is the page describing Paul Race's progress and frequent rework on his own garden railroad, started on a shoe-string budget in 1998, later expanded, and later refurbished several times as issues arose. Issues that Paul hopes to avoid by building the next iteration above ground.

Click on the photo to see the home page of Paul's railroad.

Return to Family Garden Trains' Home Page - The home page with links to all the other stuff, including design guidelines, construction techniques, structure tips, free graphics, and more.

To read more, or to look at recommended Garden Railroading and Big Indoor Train products, please click on the index pages below.